Contact Dowdens Pumping and Water Treatment to speak with our in-house Wilden representatives and find out how we can deliver complete and specialised long-term engineered solutions whilst helping your company attain significant savings now and into the future!
You own the premier AODD pump so why not keep it operating at peak performance with Genuine Wilden Diaphragms - engineered to optimise the performance of all Wilden AODD pumps.
Click to visit the Genuine Wilden Diaphragms website and select the right replacement diaphragms for your pumps.
Genuine Wilden - Accept Nothing Less.
|Turbo-Flo Model||Inlet / Discharge||Max Discharge Pressure||Flow Rate|
|T8 Metal Pump||51mm (2")||8.6 bar (125psi)||617 lpm (163 gpm)|
Click Here to view the Wilden Turbo-Flo T8 Metal Engineering, Operation and Maintenance Manual.
Click Here to view the large selection of Wilden diaphragms for every application.
Click Here for information on how to read a Wilden Pump Curve for the Turbo-Flo T8 Metal.
The Turbo-Flo™ air distribution system operates on differential pressure only; there are no mechanical trip rods, bearings or springs to wear or repair. Its externally serviceable air valve body is attached to a center block, which houses specialized Glyd™ ring seals. The air valve piston within the air valve body routes the air supply to one of two air chambers as dictated by its position. As the air chamber fills with air, the diaphragm is displaced, thus pulling the connecting shaft and opposite diaphragm toward the center block. As the shaft moves, slots on the shaft break a seal created by center block Glyd™ rings. When this seal is broken, a low-pressure area is created at one end of the air valve body causing the piston to shift up or down vertically alternately supplying each air chamber with pressurized air to displace each diaphragm. Air valve tolerances allow for the passage of some moisture and air line particulates allowing free movement of the air valve.