PRODUCT INFORMATION
Hydra Selfcleaning Coarse Sediment Filter Hot Water 90 micron Stainless Mesh 1" Plastic BSP
A Hydra Hot Self Cleaning Filter with 1” BSP Plastic inlet/outlet with 90 micron stainless steel mesh filter.
This version is has 2 differences:
- It is suitable for hot water up to 80°C
- The filter bowl is opaque and suitable for outdoor use
Suitable for coarse sediment filtration in homes on municipal water supplies, as a pre-filter for water treatment on rural supplies as well as some commercial and industrial applications. These filters perform well with lower pressure drop when higher sediment loads are present.
The filter bowl is made from heat resistant reinforced nylon
FEATURES & BENEFITS
Hydra – Cleans Your Water, Cleans Itself
Italian made, for superior construction, the Atlas Filtri hydra range of hydra self cleaning filters make coarse sediment filtration easy and convenient.
Features include:
- A range of low maintenance mesh filters are available to fit your needs
- Cartridges feature an antimicrobial flat seal
- Counter-current self cleaning system that is can be either manual or autoatic for maximum particle removal
- The drain funnel has a backflow preventing device, so this is as easy to install on mains as it is in rural
- All Hydra models come with
- Spanner
- Bracket
- Lubrikit (O-ring Lubricant)
TECHNICAL DATA
| Brand | Atlas Filtri |
| Product Type | Hydra Self CleaningFilters |
| Flow Rate (L/min) | 100 |
| Material | Polypropylene/PET |
| Nominal Micron Rating | 90 |
| Inlet/Outlet | 1" |
| Min Pressure (bar) | 1.8 |
| Max Pressure (bar) | 8 |
| Min Temp (degrees celsius) | 4 |
| Max Temp (degrees celsius) | 45 |
| Application | Whole Supply |
| Filter | Hydra |
WORKING CONDITIONS
| Max Working Pressure | 8bar (116 psi) |
| Max Working Temperature | 45°C (113°F) |
| Min Working Temperature | 4°C (39.2°F) |
LITERATURE
 |
Atlas Filtri Hydra Self-cleaning Coarse Sediment Filter Hot Water 90 micron Stainless Mesh 1" Brochure |
