PRODUCT INFORMATION

ROBUST AND COMPACT TWIN STAGE HOME PRESSURE SYSTEM

Application: Ideal for pumping clean, non-volatile liquids without fibres or solids in such applications as household water supply, irrigation, water transfer, washing systems and pressure boosting.

FEATURES & BENEFITS

The HP Series Pressure Systems, consist of an HP pump fitted with a Torrium2 controller. The Torrium2 is supplied connected electrically to the HP pump motor for:

• Easy non-tradesmen installation and assembly
• Positive safety under varied weather conditions

The combination of the high pressures supplied by the HP pump and constant flow control provided by the Torrium2, enables consumers to enjoy the benefits of a strong comfortable shower from a pump that does not cycle, plus the reliability of adaptive technology.

The complete HP Pressure System is compact and quiet providing for:

• Easy installation, especially where space is at a premium
• Non-intrusive operation, for consumer enjoyment

All parts of the entire system that are in contact with the water are manufactured from safe, corrosion-resistant materials for:

• Consumer confidence that their water supply will be as good coming out as it was going into the system
• Ability to use the HP pressure system on a variety of water qualities

PUMP

• Reliable twin stage impeller design
• All stainless steel construction for reliability and the ability to pump hot water up to 50°C
• Carbon/Ceramic mechanical seal for reliable pump operation

MOTOR

• TEFC motor constructed from corrosion-resistant materials
• IP55 international protection rating for a high level of resistance to dust and liquid entry.
• Voltage variants:
  
  • 220-240V, 50Hz, 2 pole
  • 220V, 60Hz, 2 pole (/P models)
• Class F insulation
• Higher than normal 50°C ambient temperature rating for longer life and improved tolerance to voltage variations for peace of mind, even on the hottest days.
• Protected against both high operating temperature and high current draw by a built-in, automatically re-setting, thermal overload
• Permanently split P2 ‘fail safe’ capacitor design
• Motor and pump are designed for frequent starts

TECHNICAL DATA

OPERATING LIMITS

Torrium2 cut-in pressure is normally 80% of the pumps last shut-off head.

ELECTRICAL DATA

AS/NZS 3350.2.41-1997 Approval No. A/10059EA

MATERIALS OF CONSTRUCTION

INSTALLATION AND PRIMING

• Installations with suction lift require a good quality foot valve to avoid loss of prime - remove in-built check valve.
• To prime, fill pump body and suction line through priming plug hole located above suction inlet and replace plug

DRAWINGS

LITERATURE

Davey HP85-08T Torrium2 Pressure Pump Brochure