PRODUCT INFORMATION
DAB-EUROINOX40/50 NxT Pro Stainless Steel Multistage Pump with nXt Controller
Multi-stage centrifugal pump with horizontal shaft, with excellent suction capacity even in the presence of air bubbles, featuring extremely quiet operation suitable for domestic water supply and pressurisation, irrigation of gardens and general water movement.
FEATURES & BENEFITS
FEATURES OF PUMP
Pump body in stainless steel. Motor support in die cast aluminium, with seal holder cover in AISI 304 stainless steel. Carbon/ceramic mechanical seal. Rotor shaft in AISI 304 stainless steel. Impeller and diffuser bodies and diffuser in technopolymer. Stainless steel wear ring.
FEATURES OF MOTOR
Asynchronous type, closed, with external air cooling. Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life. Incorporated thermo-amperometric protection and permanently inserted capacitor in the single phase version.
CHARACTERISTICS
- Operating Range: from 10 to 120 litres/min. with head up to 59 m.
- Liquid Quality Requirements: clean, free from solid or abrasive contaminants, non-viscous, non-aggressive, uncrystallised and chemically neutral, close to the properties of water.
- Liquid Temperature Range: from 0°C to +35°C for domestic use (EN 60335-2-41).
- Maximum Ambient Temperature: +40°C
- Maximum Operating Pressure: 8 bar (800 kPa)
- Installation: fixed or portable in a horizontal position.
- Motor Protection Rating: IP 44
- Terminal Block Protection Rating: IP 55
- Insulation class: F
- Standard Input Voltage: Single phase 220/240 V / 50 Hz Three phase 230/400 V - 50 Hz
- • Electrical Data: 0.55 kW 3.9A 240V
CONTROLLER
This pump includes the Bianco iCON nXt PRO series of pump controller.
The nXt PRO Controller is designed and tested in Australia to ensure operation in the toughest of environments, combining innovative technology with robust proven architecture to guarantee constant supply of pressurised water when and where you need it the most.
CONTROLLER FEATURES
- Digital display gives you a real time indication of system pressure
- Anti-cycle Protection
- Dry run protection with auto restart function that tests for water availability every 24hrs
- Anti-seize function if pump has not operated for last 24 hours
- Controller automatically restarts pump after a power failure
- Easy assembly and removal using push-n-connect fitting with U clip
- Complies to AS/NZ 4020 drinking water standard
- Over pressure protection turns pump off when 10 bar is reached
- Overload protection
CONTROLLER MODES
Two operational modes:
- Mode One - Adjustable cut in pressure setting
- Controller stops pump when flow drops.
- Mode Two - Adjustable cut in and cut out pressure
- Shut down governed by pressure. Requires pressure tank.
TECHNICAL DATA
| Brand | DAB Pumps |
| Product Type |
Pressure System |
| Suitable For |
Clean Water |
| Bar |
5.7 |
| Approval |
Drinking Water Approval |
| Amps | 5.3 |
| Flow Range Category |
a. 0 - 99 L/min |
| Flow Rate (L/min) |
80 L/min |
| Float | No |
| Hp |
1.1 |
| kPa | 565 |
| Kilo Watts |
0.8 |
| Head Range Category |
b. 40 - 59 m |
| Max Head (m) | 57.7 |
| Port Size Inlet |
1" BSPF inlet |
| Port Size Outlet |
1" BSPM outlet |
| Powered | Electric |
| Taps | 8 |
| Volts |
240 |
| Warranty (months) |
24 Months |
| Watts |
800 |
nxt PRO CONTROLLER DATA
| Function |
ON/OFF + Config |
| Modes |
2 |
| Size |
2.2Kw |
| Rated Voltage |
220-240V AC |
| Rated Voltage | 16 |
| Rated Power |
2200w |
| Rating | IP65 |
| Union Size | 1" |
| Start Pressure | Adjustable |
| Start Pressure | Adjustable |
| Max Pressure | 10 bar (145PSI) |
| Max Liquid Temp | 40°C |
| Max Liquid Temp | Plug and Play |
| Max Liquid Temp | When sold as control only |
| Power Cable | 10AMP |
| Power Cable | --- |
| Accessories (Sold Separately) |
15 AMP Cable | 1 ¼” Union Kit |
DRAWINGS
 |
 |
LITERATURE
 |
DAB-EUROINOX40/50 NxT Pro Stainless Steel Multistage Pump with nXt Controller Brochure |
