PRODUCT INFORMATION
SHALLOW AND DEEP WELL JET PUMPS
Suitable for suction depths down to 50m, the shallow and deep well jet pumps with pressure switch are a rugged pump suitable for supplying high-pressure water for garden sprinklers, stock watering and washdown. Other popular applications include supplying water from dams, creeks, rivers and bores, or tank filling.
FEATURES & BENEFITS
The combination of high pressures supplied by the jet-assisted shallow well pump and constant flow with loss of prime protection provided by the Torrium2 controller enables consistent and trouble-free operation whilst protecting the pump from damage.
The Torrium2 controller is supplied connected electrically to the shallow well pump motor for:
- Easy non-tradesman installation and assembly
- Positive safety under varied weather conditions
All parts of the system that are in contact with the water are manufactured from safe, corrosion-resistant materials for:
- Consumer confidence that their water supply will be as good coming out as it was going into the system
- Ability to use the shallow well pressure system on a variety of water qualities
Compliance with the strict requirements of ISO 9001.2000 quality standards ensures consistency of quality of the system.
PUMP
- 1 stage (single impeller)
- Open vane impeller
- Stainless steel impeller wear plate
- Inbuilt check valve
- Mechanical shaft seal
- Oring casing seal
MOTOR
- Davey manufactured
- TEFC with IP55 enclosure
- Class F insulation
- Double contact C3-HTG sealed bearings
- Inbuilt thermal overload protection
- Plastic feet on motor shell
For more detailed information on the Torrium2 controller, please refer to the Torrium2 datasheet on the Davey website
TECHNICAL DATA
OPERATING LIMITS
| Type | 095S1T | 125S1T | 165S1T |
| Maximum capacity (@260kPa, nil suction) lpm | 95 | 126 | 126 |
| Maximum suction head (m | 7.5 | 7.5 | 7.5 |
| Maximum water temperature | 50°C | 50°C | 50°C |
| Minimum water temperature | 1°C | 1°C | 1°C |
| Inlet size | 1 1/2" BSP(F) | 1 1/2" BSP(F) | 1 1 2" BSP(F) |
| Outlet size | 1 1/4" BSP(F) | 1 1/4" BSP(F) | 1 1/4" BSP(F) |
ELECTRICAL DATA
| Shallow Well Pump – Type | 095S1T | 125S1T | 165S1T |
| Supply voltage (1ø) | 220-250 | 220-250 | 220-250 |
| Output power (kW) | 1.1 | 1.4 | 1.8 |
| Maximum rated current @ 240V (amps) | 7.2 | 8.5 | 10 |
| Locked rotor current @ 240V (amps) | 21 | 25 | 39 |
| Insulation class | F | F | F |
| IP rating | IP56 | IP56 | IP56 |
| Starting (1ø) | P.S.C. | P.S.C. | P.S.C. |
TORRIUM 2
| Model | TT70 |
| Voltage | 110-240V±10% |
| Phase | Single |
| Hz | 50 / 60 |
| IP rating | IP56 |
| Maximum load current | 10A |
| Maximum motor size @ 240V input | 1.8kW |
| Surge protection | Varistor |
MATERIALS OF CONSTRUCTION
| PART | MATERIAL |
| Suction cover | Aluminium-Rilsan® lined |
| Pump body | Aluminium-Rilsan® lined |
| Discharge port | Aluminium-Rilsan® lined |
| Diffuser | Glass filled Noryl |
| Backplate | Glass filled Nory |
| Jet/Venturi housing | Glass filled Noryl |
| Impeller | Glass filled polycarbonate |
| Jet | Acetyl |
| Venturi | Acetyl |
| Seal ring (stationary) | Ceramic |
| Seal ring (rotating) | Carbon |
| Orings | Nitrile rubber |
| Priming plug | Nylon |
| Shaft sleeve | 316 stainless steel |
| Motor shell | Aluminium |
| Motor shell finish | Polyester powder coat |
| Capacitor cover | Polypropylene |
| Terminal box cover | Polypropylene |
| Mounting feet | Xenoy |
DRAWINGS
 |
 |
LITERATURE
 |
Davey 125S1T Shallow Well Torrium2 Jet Pump Brochure |
