PRODUCT INFORMATION
SHALLOW AND DEEP WELL JET PUMPS
Suitable for suction depths down to 7.5m, the prime jet shallow well jet pumps with Torrium2 controller are a robust pump suitable for supplying high pressure water for garden sprinklers, stock watering and washdown. Other popular applications include supplying water from dams, creeks, rivers and bores, or tank filling.
FEATURES & BENEFITS
The combination of high pressures supplied by the jet-assisted shallow well pump and constant flow with loss of prime protection provided by the Torrium2 controller enables consistent and trouble-free operation whilst protecting the pump from damage.
The Torrium2 controller is supplied connected electrically to the shallow well pump motor for:
- Easy non-tradesman installation and assembly
- Positive safety under varied weather conditions
All parts of the system that are in contact with the water are manufactured from safe, corrosion resistant materials for:
- Consumer confidence that their water supply will be as good coming out as it was going into the system
- Ability to use the shallow well pressure system on a variety of water qualities
Compliance with the strict requirements of ISO 9001.2000 quality standards ensures consistency of quality of the system.
PUMP
- 1 stage (single impeller)
- Open vane impeller
- Stainless steel impeller wear plate
- Inbuilt check valve
- Mechanical shaft seal
- Oring casing seal
MOTOR
- Davey manufactured
- TEFC with IP55 enclosure
- Class F insulation
- Double contact C3-HTG sealed bearings
- Inbuilt thermal overload protection
- Plastic feet on motor shell
For more detailed information on the Torrium2 controller, please refer to the Torrium2 datasheet on the Davey website
TECHNICAL DATA
OPERATING LIMITS
| Type | 095S1T | 125S1T | 165S1T |
| Maximum capacity (@260kPa, nil suction) lpm | 95 | 126 | 126 |
| Maximum suction head (m | 7.5 | 7.5 | 7.5 |
| Maximum water temperature | 50°C | 50°C | 50°C |
| Minimum water temperature | 1°C | 1°C | 1°C |
| Inlet size | 1 1/2" BSP(F) | 1 1/2" BSP(F) | 1 1/2" BSP(F) |
| Outlet size | 1 1/4" BSP(F) | 1 1/4" BSP(F) | 1 1/4" BSP(F) |
ELECTRICAL DATA
| Shallow Well Pump – Type | 095S1T | 125S1T | 165S1T |
| Supply voltage (1ø) | 220-250 | 220-250 | 220-250 |
| Output power (kW) | 1.1 | 1.4 | 1.8 |
| Maximum rated current @ 240V (amps) | 7.2 | 8.5 | 10 |
| Locked rotor current @ 240V (amps) | 21 | 25 | 39 |
| Insulation class | F | F | F |
| IP rating | IP56 | IP56 | IP56 |
| Starting (1ø) | P.S.C. | P.S.C. | P.S.C. |
TORRIUM 2
| Model | TT70 |
| Voltage | 110-240V±10% |
| Phase | Single |
| Hz | 50 / 60 |
| IP rating | IP56 |
| Maximum load current | 10A |
| Maximum motor size @ 240V input | 1.8kW |
| Surge protection | Varistor |
MATERIALS OF CONSTRUCTION
| PART | MATERIAL |
| Suction cover | Aluminium-Rilsan® lined |
| Pump body | Aluminium-Rilsan® lined |
| Discharge port | Aluminium-Rilsan® lined |
| Diffuser | Glass filled Noryl |
| Backplate | Glass filled Nory |
| Jet/Venturi housing | Glass filled Noryl |
| Impeller | Glass filled polycarbonate |
| Jet | Acetyl |
| Venturi | Acetyl |
| Seal ring (stationary) | Ceramic |
| Seal ring (rotating) | Carbon |
| Orings | Nitrile rubber |
| Priming plug | Nylon |
| Shaft sleeve | 316 stainless steel |
| Motor shell | Aluminium |
| Motor shell finish | Polyester powder coat |
| Capacitor cover | Polypropylene |
| Terminal box cover | Polypropylene |
| Mounting feet | Xenoy |
DRAWINGS
 |
 |
LITERATURE
 |
Davey 165S1T Shallow Well Torrium2 Jet Pump Brochure |
