DAB 62MP-8V Cast Iron Self Priming Spear Point Pump With Pressure Switch & 8L Tank



62MP Cast Iron Spear Point Pump With Pressure Switch & Tank

Self Priming Cast Iron Jet Pressure Pumps


  • Domestic installations where a suction lift is required
  • Pressure boosting, irrigation and wash down
  • Designed for pumping from tanks, rivers and dams.

Includes 18L Reflex Pressure Tank

Reflex Tanks are highly constructed pressure tanks suitable for most domestic and commercial applications.

  • Nominal volume: 18L
  • Nominal Draw-off: 6L
  • Continuous max. temp 70°C
  • Continuous max. pressure: 10 Bar
  • Pre-charge: 4 Bar (58PSI)
  • Diameter: 280 mm
  • Height: 407mm
  • Net Weight: 3.2Kg
  • System Connection: GI
  • Colour: BLUE RAL 5007


Constructional features of the pump

Pump: Cast iron pump body and motor support. Technopolymer impeller and diffuser.
Stainless steel adjustment ring. Carbon/ceramic mechanical seal.
Ejector: Cast iron body. Technopolymer A Venturi tube and brass nozzle.
The ejector is available in three models (E20 - E25 - E30) to be chosen according to performance requirements.

Constructional features of the motor

Asynchronous motor, closed and cooled with external ventilation.
Rotor mounted on oversized greased sealed-for-life ball bearings.
Built-in thermal and current overload protection and a capacitor permanently in circuit in the single-phase version.

For the protection of the three-phase motor, it is advisable to use a suitable overload protection complying with the regulations in force.
Manufactured according to CEI 61-69 standards (EN 60335-2-41).
Motor protection: IP 44
Terminal box protection: IP 55
Insulation class: F

Operating range: up to 4.3 m3/h.

  • Liquid quality requirements: clean, free from solids or abrasive substances, not viscous, not aggressive, not crystallized, chemically neutral, close to the characteristics of water.
  • Liquid temperature range: from 0°C to +35°C for domestic use (EN 60335-2-41)
    from 0°C to +40°C for other uses
  • Maximum ambient temperature: +40°C
  • Maximum operating pressure: DP 82 - DP 102 6 bar (600 kPa), DP 151 - DP 251 8 bar (800 kPa)
  • Installation: fixed in a horizontal position
  • DAB 300M Cast Iron Jet Pump Shallow Well
  • 240V single phase TEFC motor with in-built auto reset thermal overload to prevent pump from damage

Drinking Water Approved

AS/NZS 4020 Drinking Water Approved. Pumps that are AS/NZS 4020 Drinking Water Approved Offer peace of mind. This approval ensures that the pump will not contribute any toxic materials or metals to the liquid being pumped, won’t support the growth of micro-organisms and won’t change the taste or appearance of your water.

WaterMark Approved


The WaterMark Certification Scheme is a mandatory certification scheme for plumbing and drainage products to ensure that plumbing and drainage materials and products are fit for purpose and appropriately authorised for use in plumbing installations.

The Plumbing Code of Australia requires certain plumbing and drainage materials and products to be certified and authorised for use in a plumbing or drainage installation. These materials and products are to be certified through the WaterMark Certification Scheme and listed on the WaterMark Product Database.

In order to achieve Watermark Certification, the subject material or product must:

  • be tested by a recognised testing laboratory;
  • comply with an approved specification (either a relevant existing standard or an approved WaterMark Technical Specification);
  • be manufactured in accordance with an approved Quality Assurance Program; and
  • carry a warranty.


DAB Pumps
Suitable For
Clean Water
4.2 Bar
Approval Approved For Drinking Water
Flow Range Category
a. 0 - 99 L/min
Flow Rate (L/min)
45 L/min
0.6 Hp
Kilo Watts
0.44 kW
Head Range Category b. 40 - 59 m
Max Head (m)
42 m
Port Size Inlet 1" BSPF inlet
Port Size Outlet
1" BSPM outlet
4 Taps
Warranty (months) 24 Months
240 V
750 W



62MP Cast Iron Spear Point Pump With Pressure Switch & Tank Brochure